TY Series Vacuum Turbine Oil Purifier

FEATURES

1. Breaking emulsification thoroughly with high-molecule polymeric material.

2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water.

3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).

4. With the trapezoidal, spiral, automatic back flushing system.

5. With the advanced dielectric condensation devices.

6. On-line oil purification can be carried out with turbine or water turbine automatically without any person. 

ADVANTAGES

This machine breaks emulsification thoroughly, and the oil is very difficult to emulsify again after treatment. Its dehydration volume is large and it can absorb water on line. TY series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines.

 WORKING PRINCIPLET

When purifier starting, oil is flowed into primary filter under the difference pressure between inside and outside and big impurities are removed. After heating, oil flow into secondary filter. Then oil flow into water separator and then small impurities are removed.

The water separator adopts a special technique which changes the impaction of oil and water to speed up trace water and coagulate big water which is separated from oil and stored in water content. Oil is purified again by fine filter, and then flows into vacuum pump which use stereo-evaporation removing left trace water. Vaporized water was drained away by cooler or vacuum system. When the oil was transported out by oil pump, the purification process has finished.

4.